| 00:00:00 | XRF MasterclassED versus WD-XRF |
| 00:03:54 | Content |
| 00:04:56 | Where is XRF used? |
| 00:06:00 | Why use XRF? |
| 00:08:15 | The X-ray fluorescence spectrometer |
| 00:09:05 | Different types of XRF spectrometers |
| 00:09:21 | Different types of XRF spectrometers |
| 00:09:49 | ED-XRF vs WD-XRF |
| 00:11:27 | ED-XRF technology |
| 00:12:14 | Simple 2D ED-XRF Optics |
| 00:12:33 | WD-XRF technology |
| 00:13:04 | WD-XRF technology |
| 00:14:13 | Overview XRF technologies |
| 00:15:26 | Technological innovations |
| 00:15:44 | History – Analyzing cement with EDXRF |
| 00:17:26 | History – Analyzing cement with EDXRF |
| 00:19:48 | Innovations over the years |
| 00:20:53 | EDXRF – Increasing analytical performance |
| 00:21:51 | Technology trends |
| 00:23:58 | SumXcore technology |
| 00:24:38 | WD versus ED-XRF technology |
| 00:24:56 | Key criteria |
| 00:25:49 | Elemental range |
| 00:26:44 | Measurement type |
| 00:27:26 | Measurement time (speed) |
| 00:27:48 | Resolution for light elements |
| 00:28:25 | Resolution for heavy elements |
| 00:29:15 | Sensitivity for light elements |
| 00:29:58 | Sensitivity for heavy elements |
| 00:30:15 | Detection limits |
| 00:31:04 | Cost of ownership |
| 00:31:59 | Comparing WD with ED-XRF |
| 00:33:51 | Combining benefits?! |
| 00:34:12 | Combined ED + WDXRF |
| 00:35:48 | Conclusions |
| 00:37:01 | Master classes:1. Theory of XRF2. ED versus WD-XRF3. Sample preparation – fused bead versus pressed powder |
| 00:37:14 | Q&A and Thank You! |
This is the second out of three free masterclasses of XRF, explaining the differences of both XRF techniques and its related benefits.
X-ray fluorescence (XRF) is an analytical technique that can be used to determine the chemical composition of a wide variety of sample types including solids, liquids, slurries, and loose powders. It can quantify elements from beryllium (Be) up to americium (Am) in concentrations from 100% down to sub-ppm levels. After the first masterclass where we explained the basics of XRF, this second masterclass went into more details of both types of XRF: wavelength dispersive (WDXRF) and energy dispersive (EDXRF) spectroscopy, and the differences between the two types.
発表者
Dr. Lieven Kempenaers
Twenty years ago, in 1999 Lieven Kempenaers started his PhD in Chemistry at the University of Antwerp (Belgium) with dedicated focus on the use of X-rays in elemental analysis. In the course of his PhD, Lieven wrote many articles of which one was awarded as "best article of the year 2000".
In 2003 Lieven completed his PhD in Chemistry and used his XRF knowledge and experience as an XRF Application Specialist and later on as Product Manager for Malvern Panalytical, the Netherlands. After 5 years, he was re-located to the Asia Pacific regional headquarters in Singapore and took on the assignment as Asia Pacific Regional Product Manager XRF.
Once back in the Netherlands in 2012, he used his Asia Pacific experience as the global product manager for the benchtop XRF instruments.
詳細
-
Who should attend?
- Everybody working in a process control or QC environment, or research and development laboratory, in every industries segment