Keys to Successful analysis of Chlorine in Cement by Borate fusion & XRF

登入觀看此網路研討會

還沒註冊? 创建账户
00:00:00 Keys to Successful Analysis of Chlorine in Cement by Borate Fusion and XRF
00:00:19 Introduction
00:02:01 Keys to Successful Analysis of Chlorine in Cement by Borate Fusion and XRF
00:02:13 Overview
00:02:32 Sample Preparation by Fusion for Cement Industry
00:03:54 Purpose of Cl Analysis in the Cement Industry
00:05:47 Purpose of the Project
00:06:48 Fusion Method - Instrumentation
00:06:55 Equipment Used
00:07:32 Cement and Raw Materials
00:08:01 How to Calibrate for Chlorine Analysis Using Electric Fusion Instruments
00:08:08 Protocol of Experiment
00:08:48 Preliminary Test
00:09:54 Preliminary Test
00:11:04 Complete Calibration
00:11:51 Complete Calibration
00:12:14 Two Samples – Two Curves?
00:12:48 Two Samples – Two Curves
00:14:38 Best Addition Method for Cl
00:15:26 Selection of the Cl Source
00:16:06 Final Results
00:16:10 Final Selection
00:16:21 Evaluation of the Performance
00:18:23 CCRL Round Robin
00:18:41 ISO/DIS 29581-2 – Precision Test
00:19:40 ASTM C114 – Precision Test
00:20:16 Conclusion
00:21:08 Thank you for your attention!
00:21:15 Question & Answers

It has been previously shown that borate fusion using a M4 gas instrument and Wavelength Dispersive XRF (WDXRF) can comply with the analytical targets described in ASTM C 114 and ISO/DIS 29581-2 for cement analysis. As the demand for electric fusion devices increases in the cement industry, it is of interest to evaluate the performance of LeNeo and TheOx Advanced electric fusion instrument to access its capacity to comply with these analytical standard test methods using the same calibration strategy. This webinar presents the results of a calibration strategy that allows the analysis of chlorine (Cl) in cement materials using a borate fusion and WD-XRF method.

演講者

Louis Lefrancois Perreault: Louis obtained his bachelor’s degree (2014) and master’s degree (2016) in chemistry from Université Laval. His master’s thesis was about the use of mesoporous carbons for a selective separation of rare earth elements. He was hired at Claisse in 2016 as an application scientist. Before that, Louis has done an internship at AirBoss Defence for a year and a half. His fields of interest are analytical chemistry, sample preparation and material science.

更多資訊

- What will you learn?
LeNeo or TheOx Advanced fusion instrument has the same fusion capabilities and analytical performance as the M4 instrument when it comes to the preparation of cement samples. It also allows to quality for the ASTM C 114 and complies with ISO/DIS 29581-2 standard tests methods for all elements of interest in the cement industry. However, Cl analysis in cement remain difficult because of the lack of CRMs with high content of Cl. The webinar demonstrates the result of an alternative method to analyse high content of Cl in cement.